Phone: (08) 9453 2256
Email: sales@eteh.com.au

Industrial ScopeMeter® Hand Held Oscilloscope

25 MS/s / 1.25 GS/s sampling rate, 40 MHz dual input scope and multimeter for electrical, electro-mechanical applications.

General

 

The compact ScopeMeter 124 is the rugged solution for industrial troubleshooting and installation applications. It’s a truly integrated test tool, with oscilloscope, multimeter and 'paperless' recorder in one affordable, easy-to-use instrument. Find fast answers to problems in machinery, instrumentation, control and power systems.

  • Dual-input 40 MHz or 20 MHz digital oscilloscope
  • Two 5,000 counts true-RMS digital multimeters
  • Automatic measurements
  • A dual-input TrendPlot™ recorder
  • Connect-and-View™ trigger simplicity for hands-off operation
  • Shielded test leads for oscilloscope, voltage, resistance and continuity measurements
  • 10:1 Voltage Probe included for high frequency measurements
  • Up to 7 hours battery operation
  • 600 V CAT III safety certified
  • Optically-isolated interface for PC connection

Signal anomalies, dropouts and glitches that might cause a machine to go down are best displayed with an oscilloscope. The ScopeMeter 124 simultaneously measuring and checking waveforms. The unique Connect-and-View™ triggering automatically displays stable waveforms of virtually any signal.

A three-in-one tool

The ScopeMeter 124 combines a 40 or 20 MHz dual input digital storage oscilloscope, two true-RMS digital multimeters and a dual input TrendPlot™ recorder all in a compact, battery powered instrument.

One test lead measures all

High frequency waveform-, meter-, capacitance- and resistance-measurements as well as continuity checks are all covered by the shielded test leads. The included accessories allow hook-up at test objects of every dimension.

Select from 26 scope- and meter-measurements

The ScopeMeter 124 has Connect-and-View automatic triggering so you don’t have to worry about triggering and instrument settings, and you have all the information on screen to do the job right.

Battery powered mobility

Up to seven hours of battery operation frees you from mains outlets for true on-the-move working. The handheld format and the weight of just 1.2 kg, make the instrument easy to carry and to fit comfortably in your hand. The rugged and drip proof case assures long life and reliable operation in the harshest industrial environments.

Floating measurements, safety certified

While conventional oscilloscopes can only make measurements referenced to power line ground, the ScopeMeter 124 makes floating measurements so there is no risk of an accidental ground short circuit when making a connection. The ScopeMeter 124 and the included shielded test leads are safety certified for measurements on 600 V CAT III industrial power systems. And using the VPS40 probe, measurements up to 1000 V CAT II re fully supported! Via the optically isolated RS-232 or USB interface, the ScopeMeter 124 can be safely connected to a printer for direct print-out or to a PC for later analysis and documentation using FlukeView software

Connect-and-View

Scope users know how difficult triggering can be. Wrong settings show unstable and sometimes wrong results. Fluke’s unique Connect-and-View recognizes signal patterns, and automatically sets up correct triggering. It provides a stable, reliable and repeatable display of virtually any signal – including motor drive and control signals – without you touching a button. Signal changes are instantly recognized and settings adjusted for a stable display. Benefit from the speed and convenience when measuring a number of test points in quick succession.

Use TrendPlot™ to help find intermittents, fast

The toughest faults to find are those that happen intermittently. They can be caused by bad connections, dust, dirt, corrosion or simply broken wiring or connectors. You can plot the minimum and maximum peak values and average over time – up to 16 days. The two inputs can plot any combination of volts, amps, temperature, frequency and phase – with time and date stamp – to help lead you to the cause of those faults quickly.

Request a Quote

Specifications

Specifications
Oscilloscope bandwidth 40 MHz
Dual input true RMS meter VDC, VAC, VAC + VDC, Ohms,Continuity, Diode-test Current, °C, °F, Capacitance, dBV, dBM, Crest Factor, Touch Hold and Zeroset
TrendPlot recording Automatic vertical scaling and time compression
Display the actual, MIN, MAX and AVG reading
Cursors ∆T, 1/∆T, V, ∆V, rise- and fall time
Real-time sample rate 25 MS/s
Equivalent sampling rate Up to 2.5 GS/s
Inputs and digitizers 2
Timebase range 20 ns - 1 min/div
Input sensitivity 5 mV - 500 V/div
Trigger types Connect-and-View™, Free Run, Single Shot, Edge, Video, External
Glitch capture 40 ns
Scope measurements Automatic measurements: 26 (all instruments)
Maximum record length 512 min/max pts per input
Memory 20 screens and setups
Environmental Specifications
Operating temperature 0°C to 50°C
Storage temperature -20°C to +60°C
Operating altitude 3,000 m
Safety Specifications
Electrical safety 600V CAT III (EN61010-1)
Mechanical and General Specifications
Size 232 x 115 x 50 mm
Weight 1.2 kg
Warranty 3-years on main instrument
1-year on accessories
Battery life 7 hrs using NiMH
RS232/USB interface Optically isolated via optional PM9080 or OC4USB for interfacing to Printer or PC

Request a Quote

Amprobe Logo
Beamex Logo
Emerson Logo
Fluke Logo
General Tools Logo
Megger Logo