Phone: (08) 9453 2256
Email: sales@eteh.com.au

Advanced Electrical Troubleshooting Kit

The products in this kit have been specifically selected for both troubleshooting and preventative maintenance applications.

General

Establishing preventative maintenance programs are becoming critical to maintaining the uptime of electrical equipment and can significantly reduce both planned and unplanned downtime. Unplanned downtime costs are difficult to calculate, but often significant. For some industries, it can represent 1% - 3% of revenue (potentially 30% - 40% of profits) annually.

Includes a Fluke 1587 Insulation Multimeter, Fluke i400 Current Clamp, and a Fluke 62 Mini Infrared Thermometer.

  • With the Fluke 1587, perform insulation tests, plus a wide-range of DMM tasks with confidence and ease.
  • Use the Fluke i400 with your Fluke 1587 to accurately measure AC current without breaking the circuit.
  • Check for hot spots and measure temperature with the Fluke 62 Mini non-contact thermometer.

 

Fluke 1587 Insulation Multimeter 
  • With the Fluke 1587, perform insulation tests, plus a wide-range of DMM tasks with confidence and ease. 
  • Two products in one: Powerful and full-featured multimeter. 
  • Ideal for work on motors, cables, and switch gear. 
  • Large display with backlight. 
  • Filter for motor drive measurements. 
  • Insulation test (0.01 MΩ to 2 GΩ). 
  • Insulation test voltages (50 V, 100 V, 250 V, 500 V, 1000 V) for many applications. 
  • CAT III 1000 V /CAT IV 600 V overvoltage rating for added user protection. 
Fluke i400 Current Clamp 
  • Use the Fluke i400 with your Fluke 1587 to accurately measure AC current without breaking the circuit. 
  • Use with your Fluke 1587 to measure 1A AC to 400 A AC. 
  • 1 mA/Amp output guarantees easy reading. 
  • CAT III 1000 V / CAT IV 600 V overvoltage rating for added user protection. 
  • Specially designed to offer maximum utility in a very compact shape. 
  • Maximum conductor: Ø 32 mm. 
Fluke 62 MAX+ IR Thermometer
  • Dust and water-resistant: IP54 rated. 
  • Rugged: 3-meter (9.8-foot) drop tested. 
  • Ergonomically designed: Completely redesigned for a more natural hand fit. 
  • Distance to spot: 12:1. 
  • Dual lasers: Identifies area to be measured. 
  • Large, backlit display: Makes data easier to read, even in dark areas.

Request a Quote

Specifications

Fluke 1587 Insulation Multimeters
Specifications
Voltage DC Maximum voltage 1000 V
  Accuracy ±(0.09% + 2)
  Maximum resolution 0.001V
Voltage AC Maximum voltage 1000 V
  Accuracy ±(2% + 3)
  AC Bandwidth 5kHz
(with low pass filter; 3 db @ 800 Hz)
  Maximum resolution 0.1 mV
Current DC Maximum amps 400 mA
  Amps accuracy ±(0.2% + 2)
  Maximum resolution 0.001 mA
Current AC Maximum amps 400 mA
  Amps Accuracy ±(1.5% + 2)
(1 kHz bandwidth)
  Maximum resolution 0.01 mA
Resistance Maximum resistance 50 MΩ
  Accuracy ±(0.9% + 2)
  Maximum resolution 0.1 Ω
Capacitance Maximum capacitance 9,999 µF
  Accuracy ±(1.2% + 2)
  Maximum resolution 1 nF
Temperature measurement   -40.0°C to 537°C
-40.0°F to 998°F
excluding probe
Diode test Range 6 V
  Resolution 1 mV
  Accuracy ±(2% + 1)
Insulation Test
Minimum test current @ 1 kΩ/V 1 mA  
Test voltages 50, 100, 250, 500, 1000 V  
Maximum resistance per test voltage     50 V  
100 V  
250 V  
500 V  
1000 V 2 GΩ
Maximum resolution per test voltage     50 V 2 GΩ
100 V 0.01 MΩ
250 V 0.1 MΩ
500 V 0.1 MΩ
1000 V 0.1 MΩ
Accuracy per test voltage     50 V ±(3% + 5)
100 V ±(3% + 5)
250 V ±(1.5% + 5)
500 V ±(1.5% + 5)
1000 V ±(1.5% + 5) to 600 MΩ, ±(10% + 3) above 600 MΩ

Request a Quote

Amprobe Logo
Beamex Logo
Emerson Logo
Fluke Logo
General Tools Logo
Megger Logo